On Sat, Nov 29, 2014 at 09:40:17PM -0500, John DiLorenzo wrote:
> Well, I got my problem figured out. I opened up the unit to replace the
> fuse and to see if there were any problems I could see. I examined the
> step-start relay (an open frame type), and tried to move the contact arm.
> That's when I noticed that the arm was "misaligned". I obviously had
> bumped it when I was replacing the detector diodes. Anyway, it was a
> simple matter to wiggle the arm back into place. I put the lid on with a
> single screw to test things, and everything seems to be fine. It is all
> buttoned up now,,and is working fine.
>
> Thanks again for the replies; I just wanted to let everyone know what was
> found.
Excellent! May all your bugs be that easy to find and that low-impact.
--
Mike Andrews, W5EGO
mikea@mikea.ath.cx
Tired old sysadmin
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|