To: | <amps@contesting.com> |
---|---|
Subject: | [Amps] 3CX1200 tubes |
From: | "Randy" <hamradio@oz.net> |
Reply-to: | hamradio@oz.net |
Date: | Sat, 21 Mar 2015 07:30:20 -0700 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Aside from the physical and filament differences is there much difference in RF performance between the 3CX1200A7, D7, and Z7 tubes? Is one more suited for HF SSB service (lower IMD, etc.)? If you had all three types available and wanted to build an HF SSB amp project from scratch, which of these would be the best choice? Thanks. Randy, W7HR Port Orchard, WA _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] GS-35b fully-submersed oil cooling, Steve Wright |
---|---|
Next by Date: | [Amps] Chippewa amplifier, John Lyles |
Previous by Thread: | [Amps] Re GS35B Arcing or Gassy, nemo zilch |
Next by Thread: | Re: [Amps] 3CX1200 tubes, Dick Hanson |
Indexes: | [Date] [Thread] [Top] [All Lists] |