------------ ORIGINAL MESSAGE ------------(may be snipped)
On Tue, 14 Feb 2017 19:40:04 -0600, you wrote:
>has anyone ever thought of just immersing the whole amp in mineral or
>transformer oil?
>
>Joe WB9SBD
REPLY:
it could be done but you still have to get rid of the heat. Keep in
mind that so-called "water cooled" amps are really cooled by air. The
water is just a medium to carry the heat from the tube or transistor
to the heat exchanger.
The exception of course, is if you have a continuous stream of
incoming cold water which is discharged without recirculating.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|