And I've had one running for almost a year now, no problems.
Norm
----- Original Message -----
From: "John Benson" <john@mwutah.com>
To: <karlnet@WISPNotes.com>
Sent: Friday, December 13, 2002 12:16 PM
Subject: RE: [Karlnet] prisim radios for AP-1000's
> They don't work very long. I tried one, and it worked for about half of a
> day, and then shut down. The RG could not handle the power draw. That
was
> using the prism 2.0 100mw cards.
>
> John Benson
> Wireless Systems Engineer
> 801-427-0719
> Wnoc
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of George Minich
> Sent: Friday, December 13, 2002 7:16 AM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] prisim radios for AP-1000's
>
>
> How well do the 100mW work in the RG-1100's? Which brand and model of the
> cards are people using with success?
>
> Thanks
>
> George
>
> ----- Original Message -----
> From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
> To: <karlnet@WISPNotes.com>
> Sent: Friday, December 13, 2002 3:35 AM
> Subject: RE: [Karlnet] prisim radios for AP-1000's
>
>
> > Bob
> >
> > We have many people using the 100mW cards with very good success running
> > TurboCell on the AP-1000. Disclaimer, this solutions is not supported
> > directly by Orinoco, Karlnet or Demarc. The only is the noise level
> > reading are not accurate, but version 4.31 seems to have changed
> > something should know more about this is a few days.
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Open Chat Server http://www.demarctech.com:8000
> > Yahoo IM: tonymorella
> > Wireless Solution Provider
> >
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> > > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of Bob Hrbek
> > > Sent: Wednesday, December 11, 2002 6:07 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: [Karlnet] prisim radios for AP-1000's
> > >
> > >
> > > What is working best with AP-1000's and Karlnet 4.x?
> > >
> > > I want to get rid of some of my amps to lower noise. What
> > > will the trade
> > > off be if I replace my ORiNOCO radios and Amps with just a
> > > high power Prisim card?
> > >
> > > Thanks,
> > > bob
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
|