I was wondering if any of you out there have any experience running a VPN
through the CPE+ NAT.
Our Network is not Routing or Bridging (Except for the NATs) so the whole
Wireless network is internal IPs.
We are trying to do a point to point VPN through this network to a VPN server
(Just a Windows Server) behind one of the CPE+.
192.169.0.123 VPN Client ------------------> 192.169.0.200
--------------------->192.168.0.2
CPE+
192.168.0.1 <----------------------
192.169.0.99 (Main IP of CPE+ for Management)
The CPE has its main IP address which we use for access to it so the NAT IP
does not interfere.
The incoming NAT (192.169.0.200) is set to Forward all ports (setting 0) to
192.168.0.2
The gateway on the Incoming NAT is 192.168.0.1
Outgoing NAT is Not turned on and neither is DHCP. This is the only function
running and we can get to other applications that we run on the server such as
PcAnywhere or VNC client so we know it is working, but it does not connect with
the VPN. It hangs on the "Verifying Username and Password" part.
There are no other firewalls between them. None on the CPE and Windows firewall
is disabled as well. It a bit of a mystery to us but we would really like to
figure this out. Any Suggestions? Anyone else done a VPN like this? What did
you use to do it?
Thanks,
Paul Kunzler
Source One Internet
|