Bridges are fine. do you have then installed in production sites? What work
does the firmware need?
Thanks Tom
----- Original Message -----
From: "Norm Young" <lists@applegatebroadband.net>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Thursday, July 24, 2003 12:53 AM
Subject: Re: [Karlnet] AP hardware for Karlnet
> You might try the Ubicom 19dB CPEs from MapleNet. So far I'm pretty happy
> with them. Just bridges, and need some work on the firmware, but
definately
> headed in the right direction, and right around $300/unit.
>
> Norm
>
>
> ----- Original Message -----
> From: "Linuxwhat" <linux@kolb.net>
> To: "karlnet" <karlnet@WISPNotes.com>
> Sent: Wednesday, July 23, 2003 8:19 PM
> Subject: [Karlnet] AP hardware for Karlnet
>
>
> Hello,
>
> We have been testing Karlnet for a few months with great sucess. We have 2
> Ptmp and 2 Ptp links up and we are very happy with the performance and
> reliablity. We also are testing Motorola canopy. Works well but very
pricy.
>
> Up to this point we have used Orinoco ap-1000's and gr-1000's with sivler
> cards and some Seneo 200mw cards. We are getting ready to begin general
> deployment are wanted to get suggentions on cpe equipment the works as
well
> as rg's but will help to lower cost. I am interested in self contained in
> antenna units as well as typical antenna coax to ap.
>
> Thanks for your help.
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
|