Jay,
Not in the Orion firmware but it can be done if you use N4PY's control
program. The choices that N4PY give you with the pod will amaze you. He
handles the RIT/XIT the "conventional" way too. You might want to look at
the documentation for his program, which is on a link at
http://www.ralabs.com/n4py/. His program overcomes many of the
idiosyncrasies of the Orion firmware.
Jim N7US
----- Original Message -----
From: "Jay Terleski" <jayt@arraysolutions.com>
To: "Grant Youngman" <nq5t@comcast.net>
Cc: "'Jim McDonald'" <jim@n7us.net>; <orion@contesting.com>;
<ditsnbits@tentec.com>
Sent: Sunday, June 05, 2005 11:31 AM
Subject: Re: [Orion] RIT/XIT in Orion
Grant or anyone.
Related to the RIT control, and the POD tuning otption. Is there a way
to assign RIT to one of the PODs function keys? I couldn't figure it
out. But seems like this would be a standard option. Can anyone lead
how to do it.
Thanks
Jay
Grant Youngman wrote:
>>After engaging the XIT and setting the offset, I turned on
>>the RIT but the offset is 0, not the offset already set with
>>the XIT. When I turn the RIT knob the XIT moves along with
>>the RIT, maintaining a difference between transmit and
>>receive frequencies.
>
>
> RIT and XIT are independent, as though you had two separate controls. You
> can, however, lock them a fixed offset from each other by pressing both
> XIT
> and RIT and the same time.
>
> Grant/NQ5T
>
>
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
>
>
>
--
Jay Terleski
Array Solutions
972 203 2008
Military Communications Systems, Phased Arrays, RF Switches, Antennas &
Towers
http://www.arraysolutions.com
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|