> On Mon, 18 Jul 2011 07:19:36 -0700, jeff stai
> <wk6i.jeff@gmail.com> wrote:
>
> >
> >(When you start up Writelog/MMTTY (at least) you can't assume your
> >settings will be the same as the last time you operated -
> always double
> >check. I've been burned by AFC showing up turned on
> >unexpectedly...)
>
> REPLY:
>
> This is true for N1MM Logger to. I found it best to click the
> "Running" box at least twice to be sure AFC on/off is set
> correctly. Otherwise it is possible to have AFC on during
> S&P, somehting you really don't want if you're using FSK.
> Also, look at the MMTTY window and verify that your MARK tone
> is set to 2125 (or whatever default you are using). If it
> isn't, click the "HAM" button.
>
> 73, Bill W6WRT
The AFC parameter for all profiles stored in userpara.ini is set to '1', or
on. That's why it is always on when you start up MMTTY, no matter how you
left it previously. You can edit all entries to 'AFC=0' and avoid this
problem.
Ed - W0YK
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|