RTTY
[Top] [All Lists]

Re: [RTTY] MMTTY difficulties

To: rtty@contesting.com
Subject: Re: [RTTY] MMTTY difficulties
From: Lee Roberts <ham@n0sq.us>
Date: Thu, 07 Feb 2013 19:17:09 -0700
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
I use FSK only.

The ACC2 connector worked fine with the Kam+ attached to it so the radio is OK. 
ACC2 for both the TS450 and TS2000 are identical.

As for the diddles, mostly diddles are being transmitted but it sounds like 
some FSK goes out but it's garbage.

The links you provided weren't of any help.

I'm thinking that it's some kind of settings issue so I experimented and 
couldn't find a problem.

Michael Haack <mikehaack@aol.com> wrote ..
> Lee,
> 
> I'm Not completely familiar with the TS2000, having used the 
> TS430/940/950SDX.
> However, I would look to see if you are in fact sending data (FSK) to 
> the radio and not just keying Diddles.
> Are you send AFSK to the radio or FSK?
> 
> It might involves the AAC2 connector as well.
> 
> Might want to take a look here.
> http://www.aa5au.com/rtty_radios.html#TS-2000
> http://www.k2dsl.com/2009/03/02/fsk-vs-afsk-on-a-ts-2000-what-a-difference/
> 
> 73, good luck
> Mike WB9B
> 
> 
> On 2013-02-07 6:52 PM, Lee Roberts wrote:
> > I built my serial port interface for use with MMTTY but I can't seem to 
send
> > traffic. I am transmitting diddles though. MMTTY shows the text that I want 
to
> > transmit but I don't get anything on my test receiver other than diddles. 
I'm
> > using a TS2000 and homebrew desktop running WinXP for transmitting and I'm
> > using a TS-450 to receive with a Kam+ and a laptop running minicom (a 
Linux
> > terminal program). Everything seems to be working except that no text gets
> > transmitted.
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>