I'm getting more confused. My main radio is a Flex 5000 and I have
successfully connected it to N1MM so I'm not a total neophyte at this
but I'm still not sure how to proceed. I was wanting to add the 7100 as
a second radio in order to try some SO2R.
I never tried connecting the USB cable as I thought there was no way to
interface USB to N1MM directly. But a friend of mine suggested that
maybe once I do connect via USB that a new COM port will appear and then
I can interface with N1MM. I'm going to try that this afternoon.
My intent was to use FSK and I have already tested that part of the
connection. It is the CAT functions I can't figure out.
Jim's post really has me confused. Jim, if you have time, could you
please contact me off list and tell me how you have your radios set up?
I guess I don't understand about the internal sound card. I knew the
radio can decode RTTY directly but how does 2Tone process the audio if
the soundcard is inside the radio?
Thanks,
Mark K5XH
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|