RTTY
[Top] [All Lists]

Re: [RTTY] IC-7100

To: rtty@contesting.com
Subject: Re: [RTTY] IC-7100
From: Bob Burns W9BU <w9bu_lists@rlburns.net>
Date: Fri, 13 Feb 2015 12:09:56 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
On 2/13/2015 11:05 AM, Jim W7RY wrote:
All you need is a USB cable. No other interface required. The rig also
has a built in sound card. So you can send RTTY directly from the
computer with no other hardware required.

I don't have direct experience with the IC-7100, but that's how it works with the IC-7200 and IC-7600.

You have to download and install a driver from the Icom Japan web site.

That driver and the installation instructions can be found here:

http://www.icom.co.jp/world/support/download/firm/IC-7600/usb1_20/

You must install the driver BEFORE connecting the USB cable between radio and computer.

You can probably find the info on the web for one of the above mentioned
rigs and N1MM+.

There's a file in the N1MM+ support wiki that walks you through how to do this:

http://n1mmplus.hamdocs.com/tiki-download_file.php?fileId=685

I also highly recommend a YouTube video that Julian Frost N3JF produced which walks you through the process of making an IC-7200 work with fldigi. It may be very helpful in understanding the concepts.

http://youtu.be/szFnnwBCilI?list=PLRSwUN4qr1LrlszOGjqjtVHqiBIdPy0Bn

Bob...
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>