Hi All,
Some observations that I have made for sending QTC with N1MM+.
If the QRV button us pressed, only the header is sent. the transmission
get stucked. When goging to reveice and send again, it will do it twice.
if not pressed, the transmission is going ok.
73, Martin VE2NMB/VA2PX
2016-11-12 10:39 GMT-05:00 Richard Ferch <ve3iay@gmail.com>:
> If the bar at the left is yellow and the screen is frozen, click on the bar
> to turn it green and restore normal receiving.
>
> I just figured out why this is happening to some people and not to others.
> It does not happen when the DI window is set to Scrolling - everything
> works fine. However, when the DI window is set to Non-scrolling, the bar
> turns yellow and the display freezes when each QTC is received. The easy
> way to fix this is to open the DI Setup window and in the lower left,
> change the Window Scroll to Scrolling. If text scrolls off the top of the
> screen too quickly for you in Scrolling mode, you can click on the green
> bar and scroll back to get it, then click on the yellow bar to restore
> normal display of incoming text.
>
> 73,
> Rich VE3KI
>
>
> GW4SKA wrote:
>
> Happening to me too. As soon as I click on a received QTC the yellow bar
> comes
> up and the screen locks. Complete pain! Setup somewhere?
> John GW4SKA/GW0A
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
--
73, Martin
VA2PX,VE2NMB
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|