Hi Paul,
Executing that file last night caused my computer running Vista Home to
crash--twice.
Tim Ei2KA
On 26 February 2013 17:24, Paul O'Kane <pokane@ei5di.com> wrote:
> Here's what's included in V16.13 to be released
> later this week.
>
> If you're interested there's a beta version at
> www.ei5di.com/sd/sdb1613.exe
>
> Please let me know if it doesn't work as expected.
>
> 73,
> Paul EI5DI
>
> ______________________________**_________________
>
>
> SD V16.13 (Beta)
>
>
> Rig-Control:
> Improved support for older Yaesu rigs, in
> particular FT1000MP, FT817 FT847 and FT897.
>
> Support for SO2R operation updated. It is
> enabled with the 2R command, followed by
> PORTS to assign a Com Port and Name for
> the two radios. Toggle between rigs with
> the backslash "\" key.
>
> With the callsign field empty, equals "="
> sets the inactive rig to the same frequency
> as the active rig. Comma "," swaps
> frequencies. The active rig is indicated
> by R1 or R2 at either side of the date/time
> field.
>
> In mixed-mode events, the mode on the
> active rig will correspond to the frequency.
> If necessary, use the S (SSB) or C (CW)
> commands to switch. The X (eXchange)
> command lets you switch sidebands on either
> SSB or CW. The CW setting is held for both
> rigs on all bands.
>
> B40, B20 etc, and their equivalents 40M and
> 20M, switch the active rig to the new band -
> this may also be done by direct frequency
> entry, for example 14020 or 14183.56.
>
> Next step is to add support for SO2V, with
> equals "=" and comma "," having similar
> functions for VFO A and VFO B.
>
> ______________________________**_________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/**mailman/listinfo/sd-user<http://lists.contesting.com/mailman/listinfo/sd-user>
>
--
from Tim McKnight, Ei2KA
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|