Igor Sokolov wrote:
> Steve,
> I have sent you several older versions.
> Try to set BAND MAP CALL WINDOW ENABLE = FALSE or disable band map all
> together and see if the problem is gone.
That is exactly it, Igor. Either of these eliminates the problem. I'll report
it
to Dmitri.
73,
Steve, N2IC
>
> 73, Igor UA9CDC
>
>> I'm using v.4.063 beta - newer than what was out there for ARRL CW, I
>> think. I
>> have it configured for 1 radio. With COM port or LPT port keying, it
>> works fine.
>> When I switch to Winkey, the following happens:
>>
>> - CQ mode
>> - Finish sending CQ, enter a call in the call window. Hit Enter.
>> - Call and exchange are sent.....but the call disappears from the
>> entry window.
>>
>> Tried removing the restart file - that didn't help.
>>
>> Does Dmitri have older versions archived somewhere ?
>>
>> 73,
>> Steve, N2IC
>>
>> John Dvoracek wrote:
>>>
>>> I used a microHAM USB CW Keyer with a WinKey chip SO1R on a Vista Home
>>> Premium during ARRL DX and didn't notice any random keying. I thought
>>> compared to TR DOS there might be a slight delay between pressing any
>>> key
>>> and having the CW start, however, this was my first contest in
>>> probably over
>>> a year, so maybe I was just slow to press the keys. :)
>>>
>>>> There is also a limitation if you do SO2R: there is currently (at
>>>> least as
>>> of the version available ~ CQ160) no way to program a cw message to
>>> send on
>>> the inactive radio.
>>>
>>> Ouch!
>>>
>>> What issues did you experience, Steve?
>>>
>>> 73 -- John
>>>
>>> _______________________________________________
>>> Trlog mailing list
>>> Trlog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/trlog
>>>
>> _______________________________________________
>> Trlog mailing list
>> Trlog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|