[TenTec] Jupiter Noise Reduction

[N0KHQ@aol.com (N0KHQ@aol.com)]

What I have found to be very effective, is to engage the "NR" set the 
bandwidth to 3000, set the "PBT" to -0500. You can also set the AGC to FAST. 
If you need to knock out ant side frequency interference adjust the bandwidth 
down to about 2850.

Try it out. I use the above on 75m all the time.

73
John / N0KHQ / St. Louis 

Always on 17M
Antennas:
You can build 'um better than you can buy 'um.
Visit Hamuniverse.com