Perhaps it would help you to remember that the PTO's have a line which
offsets their output by some 10kHz when operating 10 meters, at least in
the Triton and black Omni rigs, perhaps others. I don't remember why
they do this but they do it. You might use this input to the PTO to
accomplish what you seek.
73, Mike N4NT
Happy Thanksgiving everybody!
----- Original Message -----
From: "Jerry Volpe" <kg6tt@arrl.net>
To: <tentec@contesting.com>
Sent: Thursday, November 23, 2006 9:18 AM
Subject: [TenTec] Adapting PTO style Ten-Tec transceivers for FSK
| I've done a preliminary search of the Internet on this subject but
| surprisingly came up dry....
|
| Does anyone have notes describing successful modifications for the PTO
| style transceivers?
|
| And yes, I know about AFSK but I'd prefer to avoid it. I recently set
up
| my Orion for FSK and would like to modify one of my other transceivers
| to incorporate FSK. I suppose it might be as easy as providing a
| calibrated voltage control to a small varactor operating in parallel
to
| the one used for RIT/XIT.... yet you would also have to unbalance the
| balanced mixer to insert carrier OR operate in CW mode without the
| normal CW offset taking effect. So although simple in concept adding
FSK
| creates some interesting challenges. So wondering if anyone tackled
this
| in the past.
|
| Happy Turkey Day to all!
|
| Jerry, KG6TT
| Fairfield, CA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|