Hamdriver66@aol.com wrote:
I recently acquired an Omni VI, with upgrade one and have developed a
problem with the internal keyer. I Have read the posts about slight variations in
keyer speed and how to modify to correct. However, my keyer has begun taking
extreme excursions in speed, like from less than ten wpm to probably near
forty wpm.
The keyer speed readout just flickers and will not give any meaningful speed
reading.
Wondering if anyone has experienced this condition, and what could be the
cause?
Thanks,
Mike K4KJC
I would re-check the key cabling and maybe try some ferrite beads or a
clamp on device. Sounds like RF getting into the keyer.
Ed W3NR
|