Re: [TenTec] best power supply for Orion II and other items

["Phil Chambley Sr." <k4dpk@comcast.net>]

The power cable will need to be unplugged from the radio in order for the 
second part of the check to be meaningful.
Phil C. Sr.
k4dpk

----- Original Message ----- 
From: "Mike Hyder -N4NT-" <Mike_N4NT@charter.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Cc: "Richards" <jruing@ameritech.net>
Sent: Sunday, November 21, 2010 7:54 PM
Subject: Re: [TenTec] best power supply for Orion II and other items


> As I said, ASTRON said:
>
> 1ST CHECK YOUR AC OUTLET GROUND IT MUST HAVE GOOD CONNECTION
>
> 2ND. MEASURE FROM THE -13.8V TERMINAL TO CHASSIS, IF NO DIRECT CONNECTION,
> RUN A PIECE OF WIRE FROM -13.8V TERMINAL TO CHASSIS.