My Ten-Tec 238 tune my 80 double ext.zepp on all bands 160-10 with a 4-1
balun 182 ft of 400 ladder line then the 4-1 with 20ft of coax.
-----Original Message-----
From: Bob McGraw - K4TAX
Sent: Saturday, September 13, 2014 9:59 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Zepp?
Because the MFJ 929 tuner only has unbalanced outputs thus no provision for
feeding a balanced load.
73
Bob, K4TAX
----- Original Message -----
From: "Richards" <jrichards@k8jhr.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, September 13, 2014 8:36 PM
Subject: Re: [TenTec] Zepp?
Yes.... so, I try my question again: Why does he need a balun? Why not
just connect the tuner to the feed line and skip the balun ?
Here is why I ask: The tuner will take itself off line whenever SWR
exceeds some threshold and power exceeds 75 watts. As the inquisitor
said, he must cycle the unit off-and-back-on to resume or restart the
tuning function.
Let's just assume for a moment the problem is NOT CMC on the window
line... why not just remove the 4:1 balun and see what gives?
I hope this is no misplaced, but a serious application of Occam's Razor
suggests to assume no balun is needed between the device and the antenna
elements. Why presume CMC or other problems ? Why not just remove the
4:1 transformer and see if it tunes without it?
That worked in my case. Less is more, sometimes.
Any traction? Now where is my Teflon suit... ;-) ;-)
----------------------------- K8JHR ----------------------------
On 9/13/2014 9:13 PM, Bob McGraw - K4TAX wrote:
My take is to bring the balanced line all the way inside to the tuner.
__________________________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|