Topband
[Top] [All Lists]

Topband: Re: Bridges and BC interference

To: <topband@contesting.com>
Subject: Topband: Re: Bridges and BC interference
From: zl3ix@inet.net.nz (Greg - ZL3IX)
Date: Fri, 15 Mar 2002 16:50:42 +1300
I don't have one of these devices myself, but if I did, and it needed a BC
filter, I would open it up and place the filter between the RF bridge and
the detector.  That way the measurement accuracy should not be affected by
the filter.  Of course, the warranty is then nullified, but better that than
a bridge that is unreliable due to BC interference.

73, Greg, ZL3IX


<Prev in Thread] Current Thread [Next in Thread>