Hi Herb,
I just looked at the DXE site and they say their Beverage system has
isolated grounds.
I would not tie the grounds together Between Beverages. It looks like you will
get plenty of isolation
if you make sure your coax shield does not have an extra ground connection
added at the antennas.
Simply connected to the DXE boxes should be fine. I also ran an Eznec pattern
with two 800 foot
Beverages 15 feet apart at the hub and about 30 degrees angle. There did not
seem to be significant
coupling. If your single Beverages do not use the DXE transformers I would make
sure the transformer
output winding for the coax is floated or isolated from ground.
Lee K7TJR Oregon
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|