The link noted below does not work for me. I am using I E 8.
I tried it 3 times. Please post a better one if you have one
73
Chet N4FX
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of Lee Ward
Sent: Wednesday, December 21, 2011 8:27 PM
To: topband@contesting.com
Subject: Re: Topband: Noise problem question
Phil, W0XI, has put a kit ultrasonic detector on the market. Well worth
looking into.
http://www.midnightscience.com/ultrasonics.htm
73, Lee, K0LW
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of W2PM
Sent: Wednesday, December 21, 2011 4:04 PM
To: John G3PQA
Cc: David Raymond; topband@contesting.com; Jon Zaimes AA1K; W5UN
Subject: Re: Topband: Noise problem question
I have used one which the ARRL RF lab brought down here to address a very
serious problem. We were able to identify the BOLT on the insulators where
arcing was coming from, photograph it, attach both the audio file and the
spectral display unique to each offender and the power company still
reneged. Until FCC saw this and that was the end of the power company
resistance. Problem fixed. Those devices are not easy to aim however. You
need a steady hand and lots of patience.
Sent from my iPhone
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|