I read many times that radials must not be very deep. Will be interesting to
know if it´s true or false
73,
Jorge
-----Mensaje original-----
De: Topband [mailto:topband-bounces@contesting.com] En nombre de Rob
Atkinson
Enviado el: martes, 09 de diciembre de 2014 08:28 p.m.
Para: topband@contesting.com
Asunto: Re: Topband: tool for install radials
>One word of caution.
>Don't put the radials too far under the surface. 2, 3, 4, or 5 inches down
is too deep! Remember that you will be cooking the soil ( introducing losses
) between the radial wires and the surface.
>Try to keep the radial wires an inch or less below the surface.
That is absolutely not true. There is no difference in performance at any
of those depths.
73
Rob
K5UJ
http://www.antennasbyn6lf.com/files/ground_skin_depth_and_wavelength.pdf
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
---
Este mensaje no contiene virus ni malware porque la protección de avast!
Antivirus está activa.
http://www.avast.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|