This is the link I used
http://www.ebay.co.uk/itm/262144126639?_trksid=p2060353.m2749.l2649
<http://www.ebay.co.uk/itm/262144126639?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT>
&ssPageName=STRK%3AMEBIDX%3AIT
73 Clive GM3POI
From: Bob K6UJ [mailto:k6uj@pacbell.net]
Sent: 04 June 2016 04:40
To: topband
Cc: Clive GM3POI
Subject: Re: Topband: UHF Male connector for 1/2" cellflex
Thanks everyone for info on a source for the UHF connectors.
This is a great forum, help is here, all you gotta do is ask ! :-)
Bob
K6UJ
On 6/3/16 8:20 PM, donovanf@starpower.net wrote:
http://www.ebay.com/itm/PL259-UHF-male-1-2-for-Corrugated-copper-Standard-Andrew-Heliax-connector-QW-/321943672180?hash=item4af5569574:g:wKwAAOSw9uFW9Pfh
_____
From: "Clive GM3POI" <mailto:gm3poi2@btinternet.com> <gm3poi2@btinternet.com>
To: "Greg Zenger" <mailto:n2gz@gregzenger.com> <n2gz@gregzenger.com>, "Bob
K6UJ" <mailto:k6uj@pacbell.net> <k6uj@pacbell.net>
Cc: "topband" <mailto:topband@contesting.com> <topband@contesting.com>
Sent: Friday, June 3, 2016 11:15:11 PM
Subject: Re: Topband: UHF Male connector for 1/2" cellflex
Check out Chinarf on ebay, I have just bought 10 off PL259 Plugs to LDF4-50
for about $4.5 delivered. High quality product.
Do a search for UHF Plug or UHF plug to 1/2" corrugated copper. 73 Clive
GM3POI
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Greg
Zenger
Sent: 03 June 2016 22:53
To: Bob K6UJ
Cc: topband
Subject: Re: Topband: UHF Male connector for 1/2" cellflex
Bob,
Take a look at RFU502-H1 from RF industries. They sell for ~$35 each new.
I don't have experience with that particular connector, but I suspect it
will work just fine with your cable.
Otherwise the RFS connectors like the ones in your link are super easy to
install. I've installed about a hundred of them over the years.
Greg, N2GZ
On Fri, Jun 3, 2016 at 6:26 PM, Bob K6UJ <mailto:k6uj@pacbell.net>
<k6uj@pacbell.net> wrote:
>
> I need to have a PL-259 type connector on one end of a 1/2" cellflex
> cable I am making up. I have an N connector on one end, no problem.
> I like the EZfit connectors and was hoping to find one for UHF male
> (PL-259)
>
> I can get another N connector and then get a N to PL-259 adapter but I
> would prefer to not have an adapter if possible. I did find one
> (below) its not an Andrew EZfit but looks to be about the same thing.
> Know of other options ?
>
> http://www.theantennafarm.com/catalog/rfs-734745-5804.html
>
> Bob
> K6UJ
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|