Re: Topband: RG-6 Delay cables

[Jeff Blaine <KeepWalking188@ac0c.com>]

Great job Lee

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com


On 4/8/20 4:11 PM, Lee STRAHAN wrote:
> Robin WA6CDR mentioned this to me in an earlier exchange this AM. It was not 
> me. Should have mentioned that before. Sorry Robin, You the Man!
> Lee   K7TJR
>
> -----Original Message-----
> From: Richard (Rick) Karlquist <richard@karlquist.com>
> Sent: Wednesday, April 8, 2020 2:00 PM
> To: Lee STRAHAN <k7tjr@msn.com>; topband@contesting.com
> Subject: Re: Topband: RG-6 Delay cables
>
>
>
> On 4/8/2020 1:28 PM, Lee STRAHAN wrote:
>
> >      Even if the copper center conductor expands, the way the cable connectors 
> > are made allows the copper to simply push in the connector  past the connection 
> > point maintaining its physical length.
> Very astute.  You may have explained this paradox.
> I didn't think of this type F effect.  Some type N connectors also work this 
> way.
>
> 73
> Rick N6RK
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector