Madison Jones wrote:
> Jim Reid wrote:
> >
> > At 06:13 PM 1/27/98 -0600, Dale L. Martin wrote:
> > >I have in my hands a package from C.A.T.S. It is the "quik connect".
> > -snip-
> > >I beg your sage comments.
> > >
> >
> > HI Dale, I have the CATS connector on the bottom of my Tailtwister.
> > Every once in awhile, I have to go jiggle it!! Every now and then
> > it seems one of the contacts within opens; a bit of a wiggle to the
> > cable just as it enters the plugged together connectors seems to
> > repair the problem for the moment.
> >
> > Not sure if my problem is the connector connecting with the mate,
> > or if a wire to the plug isn't quite connected properly.
> >
> > Anyway, the connector, for me, has been the cause of occasional
> > intermittent or no operation, until jiggled.
> >
> > 73, Jim, KH7M
> >
> > --
> > FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> > Submissions: towertalk@contesting.com
> > Administrative requests: towertalk-REQUEST@contesting.com
> > Problems: owner-towertalk@contesting.com
> > Search: http://www.contesting.com/km9p/search
> **********
> I've had mine on a HAM-IV for 3 yrs or so with absolutely no problems.
> Have moved the rotator a couple of times for various reasons without
> having to disconnect it, and it still works. I am not a fan of plastic
> connectors, but this one seem to be OK, and certainly a lot better than
> the terminal strip once you get it installed.
I've had mine on for 5 yrs and it, quite frankly, sucks big time. As the
original poster said, you need to give it a jiggle...a trip or 2 or 3 to the
top of the tower...depending on how finicky the damn thing is....
im sorry i ever put it on.
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|