Towertalk
[Top] [All Lists]

[TowerTalk] Rotor Connector

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotor Connector
From: steve@oakcom.com (Steve Maki)
Date: Wed, 28 Jan 1998 02:27:01 -0500
The K8LX style (ugly, simple, sometimes effective) is a pigtail
connected, at the rotator end, to either the terminal strip if 
it is in good shape, or run through a hole drilled in the terminal
strip and soldered internally to the neccessary points.

The other end of the pigtail terminates in a eurostyle terminal
strip (available at RS).  After connections are made, this terminal
strip is merely shoved up into a short piece of PVC pipe with a cap
on the top end, which is taped to a tower leg.


-- 
Steve Maki K8LX
steve@oakcom.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>