Towertalk
[Top] [All Lists]

[TowerTalk] Rotor tip

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotor tip
From: DavidC" <eDoc@netzero.net (DavidC)
Date: Mon, 4 Oct 1999 21:54:19 -0400
> The main problem with Molex plugs is that they get water in them easily
and
> are very hard to
> waterproof. I tried them once & had to give up on them for that reason.
>
> 73 - Alan NS0B

I used them in New Hampshire on a 90 foot tower through two years of snow
and ice and rain, etc.  I had no problems though I took care to suspend them
under the rotor for protection and taped them very heavily.

I think they are designed for 12vdc at a few amps and may not be designed to
be fussy about moisture that would trouble lower-level signals.  I was
planning
to use them again, this time here in Florida ... lots of rain, but lots more
sun and
wind to dry them out!

As for bulkhead applications I would suggest Polyphaser or equivalent for
everything.
Florida has more lightning but everywhere gets some.  Static gathered from
dust,
snow, etc. can also build up to significant levels.  Just a thought.

73, DavidC  K1YP

__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>