OM,
I used an automotive clutch "throw-out" bearing.
If you can find a patient parts store clerk (try a NAPA store) a
suitable device
can be found as you will have to try a number to find one with the proper
sized
hole.
The bearing is a very heavy duty "lazy susan" bearing and will need to be
welded
to some manner of adaptor plate. Weather was not a problem as I painted
mine and
it held up fine as long as it was up.
73
Tim K3HX
CW Elitist
QRP Snob (except on 160 where I'm an amp-running philistine)
Old Fart
20 WPM Extra
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|