Gene Bigham wrote:
> But can I ask, "What is the difference in perception at the receive end of a
> HF wireless signal transmitted with an antenna measured that has a 2:1
> (impedance either high or low) SWR versus an antenna that has a measured SWR
> of 1:1.2 or so - given you are working with the same antenna AND given your
> modern rig does not power reduce prior to 2:1 SWR?"
--------------
Assuming the SWR is correct, you will lose 4% of the power
transmitted. Say 40 watts at one KW out.
73
Ed
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|