Why not put a dual-female connector through the wall [they exist in many
different lengths] and simply add a short coax jumper on the inside of
the wall?
Don
N8DE
Tom Anderson wrote:
> Fellow Tower Talkians:
>
> I recently bought 100 feet of LMR 400 to feed a 2m/400 vertical on top
> of my tower at 70 feet. Going to have to cut it to feed it through the
> wall and solder on a new PL259 once I get it through the wall feed
> through. Any problems soldering it, getting LMR 400 into a PL259? Been
> using RG213 in the past. I had heard rumors that soldering LMR400 could
> be a pain?
>
> Tom, WW5L
>
>
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|