I just ordered a HD70 from AN/Array Solutions and a 20ft mast just this
week. Shipping costs to Colorado were about $1500 for prebuilt sections or
$730 for the knocked down bundle.
I ordered a mast from Array Solutions last year for my Montana tower and I
think the shipping was just under $100 dollars for the mast alone.
Mike W0MU
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of William Q Meeker
Sent: Sunday, September 11, 2005 7:31 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Source for 20' Mast
>
Last spring I purchased an AN Wireless HD-70 support structure (7 ten foot
sections total weight > 1500 pounds!), a 22 foot 1026 DOM 2.875 inch mast,
and 120 feet of Nello 25N sections (another 600 pounds) and various other
stuff.
Dan from AN Wireless got a quote of $1300 to ship everything from PA to Iowa
(more than 1000 miles). In the end, Dan had a little slack time in his
schedule and delivered the entire order himself (for that amount), which
assured that there would not be any delays in my construction plans due to
possible shipping damage (and all of my HD-70 and Nello sections went
together perfectly!).
Bill
K0KT
>Date: Sat, 10 Sep 2005 19:53:18 -0400
>From: "Larry Stowell" <lclarks@nc.rr.com>
>Subject: Re: [TowerTalk] Source for 20' Mast
>To: "Al Williams" <alwilliams@olywa.net>, "Brian Maynard"
> <b.k.maynard@verizon.net>, <towertalk@contesting.com>
>Message-ID: <000901c5b662$d2a81c10$6501a8c0@Larry>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Well 4 years ago 1 LM470HD with tilt fixture (no mast) was $2500 to NC!! I
>think Brian is in RI so even from KS now, I think the shipping sounds right
>and don't forget now with the $3 per gal diesel the rates are going up.
>
>Larry K1ZW
>Durham, NC
>
>----- Original Message -----
>From: "Al Williams" <alwilliams@olywa.net>
>To: "Brian Maynard" <b.k.maynard@verizon.net>; <towertalk@contesting.com>
>Sent: Saturday, September 10, 2005 5:47 PM
>Subject: Re: [TowerTalk] Source for 20' Mast
>
>
> >
> > ----- Original Message -----
> > From: "Brian Maynard" <b.k.maynard@verizon.net>
> > >
> > > For reasons I would rather not recount, I have a bent mast. I ordered
> > > a replacement from HRO - a USTowers M-20R 2" O.D. x 20' reinforced
> > > galvanized mast - listing at $259. Turns out the shipping would run
> > > $600-900!
> > >
> > >
> >
> > Something is out of order here? Three years ago my 20' chrome Malloy
mast
> > was shipped from California to Olympia, Wa for $700 but the shipping
also
> > include a second 20' heavy duty mast, two motorized LM470 towers, and
one
> > tower tilt fixture.
> >
> > I suggest you check the shipping costs again.
> > k7puc
> >
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|