Noalux or similar. Got it. I was wondering about that just as I got your email.
In the Navy we used Brasso for cleaning metal so I
was not sure here.
But looks like clean with Alcohol and then coat with Noalux. So I am assuming
that Noalux is conductive and I can do the entire
length of the elements.
Now I cant wait. It will be just like new.
Oh yeah the other thing I was told was that the sheet metal screws come out
after flexing for a couple of years. I plan on mounting
it fairly high.
Would using loktite hurt anything on them?
73 fer nw,
Bob AD5VJ(AAR6VM)
Visit My Ham Blog
http://www.ad5vj.com/
10X# 37210, FP#-1141, SMIRK#-5177
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.
> -----Original Message-----
> From: W0MU Mike Fatchett [mailto:w0mu@w0mu.com]
> Sent: Sunday, May 21, 2006 10:59 PM
> To: 'AD5VJ Bob'; towertalk@contesting.com
> Subject: RE: [TowerTalk] TitanDx
>
> Clean up the joints with a scotch brite pad...The green ones.
> They work great. Then apply a light coating of an anti
> oxidant that you can buy at Lowes or Home Depot. Noalux or similar.
>
> No need for sand paper.
>
> Good Luck!
>
> W0MU
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of AD5VJ Bob
> Sent: Sunday, May 21, 2006 9:44 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] TitanDx
>
> What do you guys think?
>
> Just had a TitanDx delivered today. All the parts are there
> although it is a bit used.
>
> Came from an SK.
>
> I don't really want to just throw it up. I would like to
> refurbish it first (not only honoring the antenna but the SK as well).
>
> Has anyone ever done that with any antenna, much less one
> this sophisticated, I have not.
>
> I think I first want to clean the elements. I was thinking
> about using a soft brillow pad or light sand paper.
>
> Then I thought it might be best to ask on the reflector what
> you experienced guys would recommend.
>
> After thinking about it I thought I might damage the antenna
> by changed the wall thickness of the antennas elements.
>
> 73 fer nw,
> Bob AD5VJ(AAR6VM)
> Visit My Ham Blog
> http://www.ad5vj.com/
>
> 10X# 37210, FP#-1141, SMIRK#-5177
> Code may be taking a back seat for now,
> but the pioneering spirit that put the code there in the
> first place is out front of it all.
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|