Yes, magic stuff. It is soap based. The brand Ideal is most popular with
electricians.
The downside is that after several years, it becomes gooey and makes
removing the conductors more difficult.
73, Sam AE5L
----- Original Message -----
From: "David Jordan" <wa3gin@comcast.net>
To: <TOWERTALK@contesting.com>
Sent: Wednesday, July 20, 2011 7:42 PM
Subject: Re: [TowerTalk] pull lubricant
> Still talking about this one... just pulled two 1/2" LDF4, 1/2" rotor
> cable,
> multi-mode fiber through 150ft of 4" conduit. A half a quart of lub made
> it
> a one man job that took ten minutes. I used sweeps on the ends but
> unfortunately had to use a 45 at two different places, so the conduit was
> zig-zagged and still the pull was easy. I'm sold on this stuff and an
> easy
> clean-up when done.
>
> 73,
> Dave
> wa3gin
> ----- Original Message -----
> From: <john@kk9a.com>
> To: <TOWERTALK@contesting.com>
> Sent: Wednesday, July 20, 2011 8:23 PM
> Subject: Re: [TowerTalk] pull lubricant
>
>
>> Once I pulled 1/2 hardline ...
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|