Thanks Mark,
I also like that omni mode. It should be easy to tune up because I can
measure the current/phase with the VNA using the W8WWV method.
Big change for me - my first outdoor antenna since moving to a new QTH.
Prior work was all attic based - and I'm very glad to be getting out of that
business.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Mark Robinson
Sent: Thursday, August 30, 2012 1:40 PM
To: Jeff Blaine
Cc: TowerTalk@contesting.com
Subject: Re: [TowerTalk] four square box
I have the DX Engineering box and you are going to like the omni direction
feature. I don't know if the Comtek box has that.
With careful measuring and construction of the array, I am getting 30dB
front to back out of my 40m 4 square.
73 Mark N1UK
----- Original Message -----
From: "Jeff Blaine" <keepwalking188@yahoo.com>
To: <towertalk@contesting.com>
Sent: Wednesday, 29 August, 2012 10:07 PM
Subject: [TowerTalk] four square box
Is there a general consensus on preference between the performance of the
Comtek and DX Engineering units?
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|