Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need help estimating cable length of DXE 400 MAX

To: Dan Maguire <danac6la@gmail.com>
Subject: Re: [TowerTalk] Need help estimating cable length of DXE 400 MAX
From: Randy Lake <randyn1kwf@gmail.com>
Date: Sun, 12 Jan 2020 18:37:28 -0500
List-post: <mailto:towertalk@contesting.com>
200' as the part# indicates ?
Maybe even math only, looks like roughly 200'

On Sun, Jan 12, 2020 at 6:25 PM Dan Maguire <danac6la@gmail.com> wrote:

> Jim Brown wrote:
> >>> BUT -- VF for ALL transmission lines varies with frequency ...
>
> For an illustrated example of determining line length along with
> frequency-dependent VF see section "Line Length via Quarter or
> Half-Wave Points" (about half-way down the page) here:
>
> https://ac6la.com/zpapndx1.html
>
> The little Freq-VF-Len-WL Conversions applet that is mentioned in the
> above link is available under TLDetails and AutoEZ as well as under
> Zplots.  AutoEZ and Zplots require Excel, TLDetails does not.  All are
> available for download from here:
>
> https://ac6la.com/
>
> Dan, AC6LA
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


-- 
Randy Lake N1KWF
73 Gunn Rd.
Keene,NH
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>