Jim,
I have used hundreds of RFI UHF, N, and BNC crimp connectors for
years with great success. The only failures were dumb mistakes that
I made. The crimps are well made, tight and resistant to pull-out
from thermal contraction of the cable. The center pin is a
gas-tight connection and the braid is hex ring crimped over a
knurled surface.
I bought the RFI Crimp Tool with several dies for different coax
types. And, the coax stripper from DXE. A good investment overall.
73 Bill N4LG
At 12:53 AM 6/8/2024, Jim Brown wrote:
I need to buy a few 2-3) coax adapters, N-female to PL-259 Male.
Amphenol parts seem to be close to unobtainium -- > $160 each in
lots of 7, delivery in 3 months. I see nothing in the surplus
market. Don't want junk. I see RF Industries parts listed in the
$5 range. Any experience with quality of their products?
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|