Hi Barry:
That is because the field in Writelog is QTH that the State or Ve province
went in to. Wayne should make sure that with this type of info there should
be a state and province field in the log, so that when ADIF exports the
fields, they are imported to the correct fields. As far as I know there is
nothing you can do except if you have a Callbook on CD rom that can update
your missing state field.
73' Lloyd
Web Page: http://gnv.fdt.net/~nx4w/
Lloyd S. Smith
12220 NW 157th St.
Alachua, FL 32615-6445
ARS: NX4W
Formerly: AE4WF, N1OAZ
904-462-9085
-----Original Message-----
From: owner-rttywrite@larry.wu3v.net [mailto:owner-rttywrite@larry.wu3v.net]
On Behalf Of Barry Kutner
Sent: Tuesday, October 06, 1998 5:45 PM
To: rttywrite@larry.wu3v.net; dx4win@qth.net
Subject: Writelog import to DX4WIN
Just attempted an import of my CQWW RTTY log from Writelog into
DX4WIN using the ADIF format. ONly problem is for stateside QSOs,
the state is being imported into the "notes for this call" field. Which
end is the problem (Writelog ADIF file or DX4WIN import filter), and
how do I fix it?
Tnx/Barry
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
|