Clive,
With changes in the .ini, Writelog can access the upper COM ports easily.
For example:
[Ports]
CommSlot3=5
Will let COM5 show up in slot 3 of the four that WL supports.
Works great, no problem at all.
Ric KV1W
----- Original Message -----
From: "Clive Whelan" <clive@gw3njw.fsworld.co.uk>
To: <WriteLog@contesting.com>
Sent: Thursday, November 08, 2001 14:24
Subject: Re: [WriteLog] WL Compatibility
> K0PC Pat Cain wrote:
> > I'm not sure about your PCI I/O card. Generally, if you can
> > see the com
> > port in Windows you can use it in WriteLog.
> >
>
>
> Unfortunately, as I have just discovered PCI i/o cards, only
> permit COM5 up, and WL only permits COM4 down, seems like a non
> starter?
>
>
> 73
>
>
> Clive
> GW3NJW
> gw3njw@gw7x.org
> Contest Cambria-http://www.gw7x.org
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|