Thanks to all who gave input on the USB to RS232 devices. I went ahead and
ordered it after someone pointed out the 30 day unconditional return policy.
Thanks.
Mike / W8DN
----- Original Message -----
From: "Mike Rhodes" <weightdn@bright.net>
To: <writelog@contesting.com>
Sent: Thursday, January 24, 2002 7:47 PM
Subject: [WriteLog] Byterunner USB-4COM-110V Experience ??
> Wondering if anyone has had occassion to play with the above mentioned
> Byterunner USB to 232 converter ($125) or its siblings? I have the 4S/2P
ISA
> card from Byterunner (TC-420) but can't seem to get it running since I
went
> to a 40gig HD with a PCI ATA100 adapter. Suspect the ATA card is the
culprit
> but apparently eliminating the ATA card is not just a matter of swapping
the
> cable back to the onboard IDE controller - at least it didn't work the one
> time I tried it.
> I'm thinking (hoping) that the onboard serial ports could be used for
the
> packet TNC and FSK/CW connections and the USB>232 ports would be ok for
rig
> control, modem, PK232 TU, and whatever else I can think to hook up (rotor
> control someday). I know there have been issues mentioned in the past but
> think a lot of it was around 5 vs 8 level and response times. Hopefully
the
> items I choose to hang off the converter would be able to tolerate any
> timing issues.
> Your thoughts/experiences?? The price is pretty reasonable and could
> possible make things a lot simpler for the laptop users too.
> Thanks.
>
> Mike / W8DN
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|