Only as an ALIAS. Actually as nothing to do with anything right now.
I shot a E-mail off to Glenn, W6OTC, the contest manager to see if we
can get some clarification on all this.
You may not want to change your namedmul.ini file just yet. He may
come back and say NB and NS are separate mults. I believe they have
been in the past.
73, Don AA5AU
----- Original Message -----
From: "George Johnson" <w1zt@attbi.com>
To: "Don Hill AA5AU" <aa5au@bellsouth.net>; "WriteLog Reflector"
<Writelog@contesting.com>
Sent: Monday, September 02, 2002 8:48 PM
Subject: Re: [WriteLog] CQWW RTTY VE multiplier corrections
> Don et all,
> Where does VE9 fit into this picture??
>
> George .. W1ZT
>
> ----- Original Message -----
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "WriteLog Reflector" <Writelog@contesting.com>
> Sent: Monday, September 02, 2002 8:14 PM
> Subject: [WriteLog] CQWW RTTY VE multiplier corrections
>
>
> > Jerry,
> >
> > You are correct! It appears the namedmul.ini files needs some
> adjusting
> > to adhere to the correct 13 Canadian multipliers as stated in the
> rules:
> > VE1, VE2, VE3, VE4, VE5, VE6, VE7, VE8, VO1, VO2, VY1, VY2 & VY0
> >
> > Not sure how this ever got to be. I always thought it was Provinces
> and that
> > VE1-NS and VE1-NB were separate multipliers but according to the rules
> I am
> > reading on the RTTY Journal & SM3CER websites, they are not separate
> multipliers.
> > Another one of those "Learn something new everyday" things I guess.
> >
> > I altered my namedmul.ini file to read under the [CQRTTY] section to
> read:
> >
> > VE1=VE
> > VE2=VE
> > VE3=VE
> > VE4=VE
> > VE5=VE
> > VE6=VE
> > VE7=VE
> > VE8=VE
> > VO1=VE
> > VO2=VE
> > VY1=VE
> > VY2=VE
> > VY0=VE
> >
> > Then under the [CQRTTY-ALIAS] section I replaced the present aliases
> with
> > the following for Canadian aliases:
> >
> > NS=VE1
> > NB=VE1
> > VE1=VE1
> > NF=VO1
> > VO1=VO1
> > LAB=VO2
> > VO2=VO2
> > QC=VE2
> > QU=VE2
> > VE2=VE2
> > VA2=VE2
> > ON=VE3
> > ONT=VE3
> > VE3=VE3
> > VA3=VE3
> > MAN=VE4
> > VE4=VE4
> > SA=VE5
> > SK=VE5
> > VE5=VE5
> > ALT=VE6
> > ALB=VE6
> > VE6=VE6
> > BC=VE7
> > VE7=VE7
> > VA7=VA7
> > NWT=VE8
> > VE8=VE8
> > YU=VY1
> > YT=VY1
> > VY1=VY1
> > PE=VY2
> > PEI=VY2
> > NU=VY0
> >
> > I then tested it and logged VE1AA as NB and it was a triple mult
> (normal VE+VE1+Zone 5),
> > then logged VE1AB as NS and it was NOT a mult., which is correct.
> Before modifying the
> > namedmul.ini file it scored two multipliers, which is not consistent
> with the rules.
> >
> > BEWARE - Changing the namedmul.ini file is no big deal as long as you
> get it right.
> > You should make a backup copy of namedmul.ini somewhere on your hard
> drive before
> > changing namedmul.ini which is located in the c:\ham\programs folder
> (if you are using
> > the default subdirectory). Do not create a new file called
> namedmul.ini or try to write
> > over the present one using a text file. It won't work. Make the
> changes to the original
> > namedmul.ini file only.
> >
> > Someone with a little more experience in changing namedmul.ini needs
> to check my
> > work thoroughly to make sure it is OK. I've not had to change this
> file much.
> >
> > Once this list is verified, copy and paste the above lists over the
> existing Canadian multiplier
> > and alias entries. In the meantime, I'll keep testing to make sure
> all the VE's score correctly.
> >
> > The only difference it makes is that WriteLog will score the contest
> correctly when the
> > corrections are made to namedmul.ini. But since the log is sent in
> Cabrillo, if you choose
> > not to change namedmul.ini then it won't make a difference to the log
> checker.
> >
> > Now the big question is whether or not WT4I Tools scores it correctly.
> I'll know that
> > in a few minutes.
> >
> > Thanks again Jerry, big find.
> > Don AA5AU
> >
> > ----- Original Message -----
> > From: "Jerry Pixton" <jpixton@shentel.net>
> > To: "Don Hill AA5AU" <aa5au@bellsouth.net>; "WriteLog Reflector"
> <Writelog@contesting.com>
> > Sent: Monday, September 02, 2002 3:57 PM
> > Subject: Re: [WriteLog] AA5AU WriteLog Website Update
> >
> >
> > > Don, any Canadians, et al
> > >
> > > Thanks to your examples, I started to set up Writelog for the CQ/RJ
> WW RTTY
> > > DX Contest.
> > >
> > > The contest I opened is called CQ World Wide RTTY Contest. But this
> contest
> > > has the multipliers set up for Canadian Provinces not Canadian
> "areas" as
> > > stated in the rule book. There is not a 1 to 1 mapping between call
> areas
> > > and provinces. It seems to me that the namedmul.ini file needs to be
> > > corrected to show the Canadian call areas, eg VE1=VE and the alias
> section
> > > needs to have for that example NB=VE1 and NS=VE1.
> > >
> > > Do I have the wrong contest? If I have the correct one, don't we
> need
> > > these changes to the namedmul.ini. Or am I reading the rules wrong?
> > >
> > > Some one please give me a sanity check.
> > >
> > > Jerry, W6IHG
> > >
> > >
> > >
> > > At 10:02 PM 8/31/2002 -0500, Don Hill AA5AU wrote:
> > > >Added example RTTY messages for CQ/RJ World-Wide RTTY DX Contest.
> > > >The example shows the newly learned (for me) use of %P1 which is
> used to
> > > >display the callsign of the previously logged station in a buffer
> for when you
> > > >want to QSL one station's report and send an exchange to another
> station that
> > > >called at the same time. I use F8 for this. Thanks to Irek,
> VE4COZ, for
> > > >pointing
> > > >this one out. I learn something new everyday.
> > > >
> > > >Added a link to the rules for CQ/RJ World-Wide RTTY DX Contest.
> > >
> > > ------------------------------------------
> > > Dr. Jerry R. Pixton, PIXOS Designs LLC
> > > http://www.pixos.com/designs/RadioTuner/
> > > jpixton@shentel.net
> > > ------------------------------------------
> > >
> > >
> > >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|