Re: [WriteLog] Writelog-CT17-Radios

["Floyd Sense" <fsense@copper.net>]

----- Original Message ----- 
From: "Ron Stordahl" <ron.stordahl@digikey.com>
To: "Richard Zalewski" <dick.w7zr@gmail.com>
Cc: "George Skoubis" <george.skoubis@verizon.net>; "Writelog" 
<writelog@contesting.com>
Sent: Monday, December 13, 2004 5:11 PM
Subject: Re: [WriteLog] Writelog-CT17-Radios


<<snip>>
> The whole thing is a can of worms.  I spent a lot of time 'fine tuning' 
> the strings and 'waits' for the ICOM 781, and then later the ICOM 
> 756ProII.
<<snip>> When I finally got a working set of strings and delays for the 
756ProII,

Interesting.  I've used my 781 extensively with Writelog and have never had 
any problems with rig communications and have never tweaked anything.  I run 
the interface at 9600 and have always used a simple cable unit to do the 
necessary serial port conversion - never used the CT17.  I've never 
understood why guys continue to buy the CT17 when there are several other 
much less expensive alternatives out there.

K8AC 


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/