Re: [WriteLog] LPT antenna relay control

["Eric Lowell" <armymars@maine.rr.com>]

With XP Pro and 10.50D, Userport worked fine here. Install new motherboard 
and I could find no combination of settings that would get the LPT1 to key. 
(works fine with DX4Win). Easiest solution, in my view, switched to COM port 
keying. Problem solved.

Regards, Eric W1EL
----- Original Message ----- 
From: "Jerry Flanders" <jeflanders@comcast.net>
To: "Jerry Pixton" <jpixton@shentel.net>
Cc: <writelog@contesting.com>
Sent: Tuesday, February 08, 2005 2:14 PM
Subject: Re: [WriteLog] LPT antenna relay control


> Wirh XP PRO and WL10.52F, UserPort installed exactly as the (real) 
> instructions said it should. After getting WL to work, I did the usual 
> save configuration, etc.
>
> Upon rebooting the machine everything STILL worked. It has continued to 
> work flawlessly over many reboots, etc, without any reinstall or 
> maintenance of any kind.
>
> I am amazed that guys are having trouble with it.
>
> Good luck
>
> Jerry W4UK
>
> At 17:38 2/8/2005, you wrote:
> > All,
> >
> > Well, I joined the ranks of those who tried to use UserPort for Writelog 
> > access to LPT1 and failed. After getting it to work the first day, no way 
> > could I get it to work yesterday. The port still seemed to be available in 
> > Writelog but no antenna relay band data at all.
> >
> > I have gone back to using the Keyer output ports while I investigate 
> > DirectIO
> >
> > Jerry,W6IHG
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/