WriteLog
[Top] [All Lists]

Re: [WriteLog] %B in SSB Mode

To: "John Desmond" <jdesmon@qwest.net>
Subject: Re: [WriteLog] %B in SSB Mode
From: "Gary AL9A" <al9a@mtaonline.net>
Date: Mon, 27 Oct 2008 07:32:39 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Hi John,

Typed the note below in haste late at night and forgot one minor detail on 
the %B dupe checking.  The message between the %B's is not as I indicated! 
Instead it should say %B<msg6.wav>%B which is where I pre-recorded audio 
message "you're a dupe om!".  Of course WL can't decipher plain text in the 
F key memory location, it does have to be in the form of a msgn.wav file. 
Sorry for the error.

73,
Gary AL9A


----- Original Message ----- 
From: "Gary AL9A" <al9a@mtaonline.net>
To: "John Desmond" <jdesmon@qwest.net>
Cc: <writelog@contesting.com>
Sent: October 26, 2008 10:41 PM
Subject: Re: [WriteLog] %B in SSB Mode


> Hi John,
>
> I did find in some old printed documentation from K9JY's web site that a
> single %B performs a dupe check and maps the call to the band map.  Must
> have missed that one years ago as I've never tried it.  Will do so soon.
>
> I've used the bracketing of %B's for sometime and it works.  For example, 
> %C
> %Byou're a dupe om! %B 5901 works as follows:
>
> If the call in not a dupe, WL skips all the stuff between the %B's and 
> sends
> the station's call followed by the exchange report.
> If the call is a dupe, WL sends the station's call followed by the dupe
> message between the %B's.  The exchange report is not sent.
>
> Just discovered another handy thing about the MapCallOnSpace=1 command.
> I've used it for sometime and if I couldn't break the pile up, or it was a
> dupe, I hit Alt-W to wipe the call out of the entry form.  I also use
> another command in my writelog.ini file in the [Entry] block,
> AutoClearOnTuneMinHz=n, that clears the call in the CALL field when the 
> VFO
> is tuned n Hz away from the current freq.  Didn't realize until this 
> contest
> that this command will clear the CALL field for me after mapping the call 
> to
> the band map by just turning the VFO knob.  Saves the trouble of hitting 
> the
> Alt-W combo all the time.  Live and learn!
>
>
>
> ----- Original Message ----- 
> From: "John Desmond" <jdesmon@qwest.net>
> To: "Gary AL9A" <al9a@mtaonline.net>
> Cc: <writelog@contesting.com>
> Sent: October 26, 2008 8:14 PM
> Subject: Re: [WriteLog] %B in SSB Mode
>
>
>> Hi  Gary,
>>
>> I was looking for that option too.  Thanks!
>> I just double checked and %B is right and does mark the call in the
>> bandmap.  I think I recall seeing that in  some examples too where you
>> bracket the item with the %B's or some character like that .
>>
>>
>> 73, John  K0TG
>>
>>
>>
>> Gary AL9A wrote:
>>> John,
>>>
>>> I thought %B had to do with sending a message identified between two 
>>> %B's
>>> if the call is a dupe.  Not sure what the single %B is supposed to do,
>>> but in SSB you can map a call to the band map by adding the following to
>>> the writelog.ini file.
>>>
>>> [Entry]
>>> MapCallOnSpace=1
>>>
>>> A non-zero causes the current CALL to be added to bandmap if you SPACE
>>> out of the CALL field.
>>>
>>> 73,
>>> Gary AL9A
>>>
>>>
>>>
>>> ----- Original Message ----- From: "John Desmond" <jdesmon@qwest.net>
>>> To: <writelog@contesting.com>
>>> Sent: October 25, 2008 8:40 PM
>>> Subject: [WriteLog] %B in SSB Mode
>>>
>>>
>>>> Hi,
>>>>
>>>> I am trying to use %B to add calls to the bandmap in the SSB test this
>>>> weekend and I cannot get that to work.  I have done it successfully in
>>>> RTTY and CW modes.  What do I need to do differently in SSB to make 
>>>> that
>>>> work?
>>>>
>>>>
>>>> TNX es 73, John  K0TG
>>>>
>>>> _______________________________________________
>>>> WriteLog mailing list
>>>> WriteLog@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/writelog
>>>> WriteLog on the web:  http://www.writelog.com/
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - http://www.avg.com Version: 8.0.175 / Virus Database:
>>> 270.8.3/1747 - Release Date: 10/26/2008 9:27 AM
>>>
>>>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>