> By the way, I am using Writelog 10.69D
>
COMn_RTS_INIT was added in Writelog 10.70. There is no way to
disable handshake in 10.69.
I suspect it's time to download the update if you're current
on support (the current public version is 10.73) or renew
support if you are not current.
73,
... Joe, W4TV
> -----Original Message-----
> From: Aldewey@aol.com [mailto:Aldewey@aol.com]
> Sent: Monday, December 14, 2009 10:20 PM
> To: lists@subich.com; gibit@xtra.co.nz
> Subject: Re: [WriteLog] CAT Problems with FT2000D
>
>
> In a message dated 12/14/2009 10:21:31 AM Central Standard
> Time, lists@subich.com writes: It does but you also need to
> disable RTS/CTS handshake in WriteLog
> FT-2000 driver. See the information for COMn_RTS_INIT in the [RIGS]
> section of the WriteLog Help file.
> Joe or John;
>
> Still no luck. Also, I do not see any reference to the HELP
> about COMn_RTS_INIT in the Writelog HELP under either the
> [RIGS] Section or the [PORTS] Section. Below is how I have
> things set up. I guessed at how to set up the RTS_INIT. Do
> you see what I am missing? Again the rig is connected to
> COM5 and I am using a 3 wire cable that works fine on the
> MarkV. I have CAT RTS turned off in the rig , the CAT BPS
> rate set to 4800.
>
> By the way, I am using Writelog 10.69D
>
> Any suggestions
>
> 73,
>
> Al, K0AD
>
> [Ports]
> COM1:=9600,n,8,1
> COM2:=9600,n,8,1
> COM3:=9600,n,8,1
> COM4:=4800,n,8,1
> COM5:=4800,n,8,2
> COM6:=4800,n,8,2
> COM7:=4800,n,8,1
> COM8:=4800,n,8,1
> CommSlot1=1
> CommSlot2=5
> CommSlot3=6
> CommSlot4=7
> CWPTTCONTROL=2
> CWPTTDELAY=0
> dvktype=3
> dvkport=4
> cwtype=2
> cwport=6
> dvkstoploop=1
> dvkechomic=2 Comm7igManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm7XmitControl=WAIT
> Comm8Used=USED,POLL,17
> Comm8RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm8XmitControl=WAIT
> Comm7RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm5Used=USED,POLL,17
> Comm5RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm5XmitControl=ALWAYS
> Comm6Used=USED,POLL,56
> Comm6RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm6XmitControl=ALWAYS
> [RIGS]
> Com5_RTS_INIT=0
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|