> I have a laptop docked with Rig Control on COM9 via USB/Serial
> and FSK on COM1 via<http://www.w3yy.com> FSK/CW interface box
> <http://www.w3yy.com/fsk.htm>
WriteLog only supports FSK on COM1-COM8. That limitation also
applies to the MMTTY plug-in since the FSK port is set by the
WriteLog RTTY Window when the "TU" (MMTTY plug-in) is started.
Since you are using the W3YY interface, I assume it is being
driven by a USB to serial adapter. You will need to configure
RTTYrite to do "Software generated FSK" on the USB port and
make sure that port is in the COM1 - COM8 range.
You hardware supplier should be providing this support ...
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
On 5/7/2010 2:10 PM, Larry 'Rebar' Rebarchik - N6CCH wrote:
> I've begun to get some more features sorted out with my K3 and have
> discovered that the MMTTY Plug-in for WL does not have the ability to
> select SOUND-COM when working in a FSK setup, the last two radio buttons
> are grey'd out in the setup control panel under WL when running MMTTY
> [RTTY
> Window].
>
> Has anyone else discovered this, or am I missing some special selections
> in my configuration to make this work?
>
> I have a laptop docked with Rig Control on COM9 via USB/Serial and FSK on
> COM1 via<http://www.w3yy.com> FSK/CW interface box
> <http://www.w3yy.com/fsk.htm>
>
> The WL/PC generated CW is working just fine, however, I cannot seem to get
> the RTTY signals to the K3 rig.
>
> MMTTY v1.66G in standalone mode keys the rig just fine.
>
--
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|