That makes sense.
I knew something was set wrong in W/L when I was able to run MMTTY in the
stand-alone mode. Because one of the symptoms of the problem was that the
rig was being keyed (but no modulation was evident), my troubleshooting was
aimed at the lack of modulation. One of the pieces of advice I received was
to connect the PTT to the ACC2 port (I forget which pin). I checked my
SignaLink info and found that it was connected, but the whole thing got me
thinking about PTT. So, without expecting a change, I disabled the W/L PTT
for that radio, and voila... In short, I'm ready for the next RTTY
contest.
Tom, AB3IC, BSCS, MAS, PhD dropout
-----Original Message-----
From: Jim Reisert AD1C
Sent: Sunday, January 15, 2012 10:13 AM
To: Tom Shelton
Cc: [WriteLog]
Subject: Re: [WriteLog] W/L & MMTTY
On Sat, Jan 14, 2012 at 5:36 AM, Tom Shelton <gl1800winger@verizon.net>
wrote:
> I finally got things working. The resolution of the problem was simpler
> than expected.
>
> All I did was un-select the PTT option from the rig under the "ports"
> menu,
> and everything started to work as advertised.
> I can't explain how or why - it just works...
It works because MMTTY always controls PTT whether it's run
stand-alone, or in conjunction with WriteLog. WriteLog should *not*
control PTT when also using MMTTY.
--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|