I am still struggling.
Now CIV Address '8E' for IC-7850, CIV Baud Rate Auto -> 19200.
As stand-alone MMTTY, selecting USB/SEND-CW-RTTY (A)RTS-(A)DTR-(A)DTR still
somehow 'shorting out' the output, resulted in key-down all the time.
By changing all to (B)RTS-(B)DTR-(B)DTR, MMTTY started working OK exception
of no FSK keying. WriteLog started sending CW ok.
Down loaded 'Extfsk.dll' for MMTTY and selecting the FSK port to EXTFSK (FSK
output-DTR, PTT output-RTS), FSK keying is ok now.
When combined with Rittyrite on WriteLog, FSK keying issue is back.
WriteLog+MMTTY+MMTTYPlugin_V13, EXTFSK selection on MMTTY FSK Port Setting
disappears.
WriteLog+MMTTY+XMMT.ocx shows EXTFSK window but said 'B' Port 'Status: NG'
on MMTTY EXTFSK
WriteLog+2Tone+XMMT.ocx shows FSK COM Port Setting window and 'COM port in
use by other software'
Seems this maybe the common to IC-7600/7850 too. Any advice ? TKS
Jon Suehiro NN5T
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|