Thanks, finally seems everything is working OK as I reported separately. Yes,
I joined to the Yahoo group too but not seeing enough information.
73 OM de Jon NN5T
-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert@alum.mit.edu]
Sent: January 3, 2018 17:42
To: Jon Suehiro
Cc: WriteLog
Subject: Re: [WriteLog] WL IC-7610 help
I have the 7610 and one of the original microKEYERs. I simply set all my
software up as an IC-7600, but told the software to expect hex address code 98
(for 7610) and all is working. I attempted to get things going using the
7610's USB interface and was able to make a single FT8 QSO using the 7610's
internal sound card, but I never tried to get CW, FSK and PTT working through
the USB interface. Since I already had at the microKEYER, it was easier to
just use everything that was already in-place, plus it gave me a second CAT
port for free.
Al, K7AR told me he has had success using CW and FSK through the 7610 USB
interface. You may try contacting him.
Or you can try the 7610 reflector:
https://groups.yahoo.com/neo/groups/ic-7610/info
73 - Jim AD1C
--
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|