Larry,
You might try opening up the control box and pulling the chip (4101 I
think), cleaning the pins and replacing it. Some of the boxes have soldered
chips instead, and they can go bad. The choice is yours. It might be the
problem, saving you a trip up, and it might just create a little extra
diagnostic work.
Good luck.
73 de Jeff K2KV
k2kv@reallybig.com
http://reallybig.com - "The Complete Resource for All Web Builders"
-----Original Message-----
From: Larry A. Crim <k4ab@nerak.companet.net>
To: yaesu@contesting.com <yaesu@contesting.com>
Cc: towertalk@contesting.com <towertalk@contesting.com>
To: <yaesu@contesting.com>
Date: Saturday, February 28, 1998 4:56 PM
Subject: [Yaesu] Frozen G-800SDX
>
>One of my rotors, a G-800SDX is stuck pointing at about 90 degrees.
>
>Does anyone have any ideas how to fix it before I take a trip up the
>tower?
>
>73,
>Larry K4AB
>
>
>--
>FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
>Submissions: yaesu@contesting.com
>Administrative requests: yaesu-REQUEST@contesting.com
>Problems: owner-yaesu@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|